 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DATA SHEET CMOS INTEGRATED CIRCUIT PD5713TK WIDE BAND SPDT SWITCH DESCRIPTION The PD5713TK is a CMOS MMIC for wide band SPDT (Single Pole Double Throw) switch which were developed for mobile communications, wireless communications and other general-purpose RF switching application. This device can operate frequency from 0.05 to 2.5 GHz, having the low insertion loss and high isolation. This device is housed in a 6-pin lead-less minimold (1511) package. And this package is able to high-density surface mounting. FEATURES * Supply voltage * Switch control voltage * Low insertion loss : VDD = 1.8 to 3.6 V (2.8 V TYP.) : Vcont (H) = 1.8 to 3.6 V (2.8 V TYP.) : Vcont (L) = 0.2 to +0.4 V (0 V TYP.) : Lins1 = 0.6 dB TYP. @ f = 0.05 to 1.0 GHz, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) = 0 V : Lins2 = 0.8 dB TYP. @ f = 1.0 to 2.0 GHz, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) = 0 V : Lins3 = 0.95 dB TYP. @ f = 2.0 to 2.5 GHz, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) = 0 V * High isolation : ISL1 = 32.5 dB TYP. @ f = 0.05 to 1.0 GHz, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) = 0 V : ISL2 = 25 dB TYP. @ f = 1.0 to 2.0 GHz, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) = 0 V : ISL3 = 22.5 dB TYP. @ f = 2.0 to 2.5 GHz, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) = 0 V * Handling power : Pin (1 dB) = +21.0 dBm TYP. @ f = 1.0 GHz, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) = 0 V : Pin (0.1 dB) = +17.0 dBm TYP. @ f = 1.0 GHz, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) = 0 V * High-density surface mounting : 6-pin lead-less minimold package (1.5 1.1 0.55 mm) APPLICATIONS * Mobile communications * Wireless communications * Another general-purpose RF switching applications ORDERING INFORMATION Part Number PD5713TK-E2 Order Number PD5713TK-E2-A Package 6-pin lead-less minimold (1511) (Pb-Free) Marking C3Q Supplying Form Embossed tape 8 mm wide Pin 1, 6 face the perforation side of the tape Qty 5 kpcs/reel Remark To order evaluation samples, contact your nearby sales office. Part number for sample order: PD5713TK-A Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge. The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Document No. PU10627EJ01V0DS (1st edition) Date Published September 2006 NS CP(K) PD5713TK PIN CONNECTIONS AND INTERNAL BLOCK DIAGRAM Pin No. 1 Pin Name OUTPUT1 GND OUTPUT2 Vcont INPUT VDD (Top View) 1 2 3 6 5 4 1 2 3 (Top View) 6 5 4 6 5 4 (Bottom View) 1 2 2 3 4 TRUTH TABLE Vcont Low High INPUT OUTPUT1 OFF ON INPUT OUTPUT2 ON OFF ABSOLUTE MAXIMUM RATINGS (TA = +25 C, unless otherwise specified) Parameter Supply Vo lt age Switch Control Voltage Voltage Difference Symbol VDD Vcont Vcont (H) VDD Input Power Operating Ambient Temperature Storage Temperature Pin TA Tstg +23 45 to +85 55 to +150 dBm C C Ratings 0.5 to +4.6 0.5 to +4.6 +0.5 Unit V V V RECOMMENDED OPERATING RANGE (TA = +25 C, unless otherwise specified) Parameter Supply Vo lt age Switch Control Voltage (H) Switch Control Voltage (L) Symbol VDD Vcont (H) Vcont (L) MIN. +1.8 +1.8 0.2 TYP. +2.8 +2.8 0 MAX. +3.6 +3.6 +0.4 Unit V V V Remark VDD C3Q 3 5 6 0.4 V Vcont (H) VDD + 0.2 V 2 Data Sheet PU10627EJ01V0DS PD5713TK ELECTRICAL CHARACTERISTICS (TA = +25 C, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) = 0 V, DC cut capacitors = 1 000 pF, unless otherwise specified) Parameter Insertion Loss 1 Insertion Loss 2 Insertion Loss 3 Isolation 1 Isolation 2 Isolation 3 Input Return Loss Output Return Loss 0.1 dB Loss Compression Input Power Note 1 Symbol Lins1 Lins2 Lins3 I S L1 I S L2 I S L3 RLin RLout Test Conditions f = 0.05 to 1.0 GHz f = 1.0 to 2.0 GHz f = 2.0 to 2.5 GHz f = 0. 05 t o 1. 0 G H z f = 1. 0 t o 2 . 0 G H z f = 2. 0 t o 2 . 5 G H z f = 0.05 to 2.5 GHz f = 0.05 to 2.5 GHz MIN. TYP. 0.6 0.8 0.95 MAX. 0.8 1.0 1.2 Unit dB dB dB dB dB dB dB dB dBm 30 22 20 13 13 + 1 3. 0 32 . 5 25 22 . 5 17 17 + 1 7. 0 Pin (0.1 dB) f = 1.0 GHz 1 dB Loss Compression Input Power Note 2 Pin (1 dB) f = 1.0 GHz +21.0 dBm Supply Current Switch Control Current Switch Control Speed IDD Icont tSW VDD = Vcont = 2.8 V, RF off VDD = Vcont = 2.8 V, RF off f = 1.0 GHz 0.01 0.01 30 1.0 1.0 100 A A ns Notes 1. Pin (0.1 dB) is measured the input power level when the insertion loss increases more 0.1 dB than that of linear range. 2. Pin (1 dB) is measured the input power level when the insertion loss increases more 1 dB than that of linear range. Caution It is necessary to use DC cut capacitors with this device. The value of DC cut capacitors should be chosen to accommodate the frequency of operation, bandwidth, switching speed and the condition with actual board of your system. Data Sheet PU10627EJ01V0DS 3 PD5713TK EVALUATION CIRCUIT VDD INPUT Vcont C0 1 000 pF 6 5 4 1 000 pF 1 2 3 C0 C0 OUTPUT1 OUTPUT2 Remark C0 = 1 000 pF Caution This IC has pull down resistance between RF line and GND, which fixes electric potential of RF line to 0 V, then the IC cannot be used for DC switching. The application circuits and their parameters are for reference only and are not intended for use in actual design-ins. 4 Data Sheet PU10627EJ01V0DS PD5713TK ILLUSTRATION OF THE TEST CIRCUIT ASSEMBLED ON EVALUATION BOARD Vcont 6pinL2MM SPDT SW Vc2 OUTPUT2 OUT 2 C2 C 2 C 4 C1 INPUT C1 IN C 5 C3 C3Q C1 C 1 C2 OUT 1 OUTPUT1 Vc1 VDD USING THE NEC EVALUATION BOARD Symbol C1, C2, C3 C4, C5 Values 1 000 pF 1 000 pF Data Sheet PU10627EJ01V0DS 5 PD5713TK TYPICAL CHARACTERISTICS (TA = +25 C, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) = 0 V, Pin = 0 dBm, DC cut capacitors = 1 000 pF, unless otherwise specified) INPUT-OUTPUT1 INSERSION LOSS vs. FREQUENCY 2.5 2.0 Insersion Loss Lins (dB) INPUT-OUTPUT2 INSERSION LOSS vs. FREQUENCY 2.5 2.0 Insersion Loss Lins (dB) 1.5 1.0 0.5 0 -0.5 -1.0 -1.5 -2.0 -2.5 0 0.5 1.0 1.5 2.0 1 2 3 4 1: -0.584 dB 0.5 GHz 2: -0.659 dB 1.0 GHz 3: -0.730 dB 1.5 GHz 4: -0.811 dB 2.0 GHz 5: -0.924 dB 2.5 GHz 1.5 1.0 0.5 0 -0.5 -1.0 -1.5 -2.0 -2.5 1 2 3 4 1: -0.584 dB 0.5 GHz 2: -0.653 dB 1.0 GHz 3: -0.731 dB 1.5 GHz 4: -0.826 dB 2.0 GHz 5: -0.968 dB 2.5 GHz 5 5 2.5 3.0 0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency f (GHz) Frequency f (GHz) INPUT-OUTPUT1 ISOLATION vs. FREQUENCY 40 30 20 Isolation ISL (dB) INPUT-OUTPUT2 ISOLATION vs. FREQUENCY 40 30 20 Isolation ISL (dB) 10 0 -10 -20 -30 -40 -50 -60 0 1: -38.2 dB 0.5 GHz 2: -31.7 dB 1.0 GHz 3: -27.4 dB 1.5 GHz 4: -23.9 dB 2.0 GHz 5: -22.4 dB 2.5 GHz 10 0 -10 -20 -30 -40 -50 -60 1: -39.0 dB 0.5 GHz 2: -31.8 dB 1.0 GHz 3: -27.9 dB 1.5 GHz 4: -24.4 dB 2.0 GHz 5: -21.6 dB 2.5 GHz 1 2 3 4 5 1 2 3 4 5 0.5 1.0 1.5 2.0 2.5 3.0 0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency f (MHz) Frequency f (MHz) INPUT-OUTPUT1 INPUT RETURN LOSS vs. FREQUENCY 40 30 Input Return Loss RLin (dB) INPUT-OUTPUT2 INPUT RETURN LOSS vs. FREQUENCY 40 30 Input Return Loss RLin (dB) 20 10 0 -10 -20 -30 -40 -50 -60 0 1: -26.0 dB 0.5 GHz 2: -21.5 dB 1.0 GHz 3: -19.5 dB 1.5 GHz 4: -18.3 dB 2.0 GHz 5: -18.9 dB 2.5 GHz 20 10 0 -10 -20 -30 -40 -50 -60 1: -26.4 dB 0.5 GHz 2: -21.8 dB 1.0 GHz 3: -19.6 dB 1.5 GHz 4: -18.5 dB 2.0 GHz 5: -18.3 dB 2.5 GHz 1 2 3 4 5 1 2 3 4 5 0.5 1.0 1.5 2.0 2.5 3.0 0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency f (MHz) Frequency f (MHz) Remark The graphs indicate nominal characteristics. 6 Data Sheet PU10627EJ01V0DS PD5713TK INPUT-OUTPUT1 OUTPUT RETURN LOSS vs. FREQUENCY 40 30 20 10 0 -10 -20 -30 -40 -50 -60 0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency f (MHz) 1: -23.6 dB 0.5 GHz 2: -22.4 dB 1.0 GHz 3: -19.0 dB 1.5 GHz 4: -19.4 dB 2.0 GHz 5: -18.5 dB 2.5 GHz INPUT-OUTPUT2 OUTPUT RETURN LOSS vs. FREQUENCY 40 30 20 10 0 -10 -20 -30 -40 -50 -60 0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency f (MHz) 1: -24.4 dB 0.5 GHz 2: -22.9 dB 1.0 GHz 3: -20.0 dB 1.5 GHz 4: -20.6 dB 2.0 GHz 5: -19.4 dB 2.5 GHz Output Return Loss RLout (dB) 1 2 3 4 5 Output Return Loss RLout (dB) 1 2 3 4 5 OUTPUT POWER vs. INPUT POWER +35 f = 1 GHz +30 +25 +20 +15 +10 +5 +5 Output Power Pout (dBm) +10 +15 +20 +25 +30 +35 Input Power Pin (dBm) Remark The graphs indicate nominal characteristics. Data Sheet PU10627EJ01V0DS 7 PD5713TK MOUNTING PAD DIMENSIONS 6-PIN LEAD-LESS MINIMOLD (1511) (UNIT: mm) 0.26 0.45 0.48 0.48 Remark The mounting pad layouts in this document are for reference only. 8 Data Sheet PU10627EJ01V0DS 1.10 PD5713TK PACKAGE DIMENSIONS 6-PIN LEAD-LESS MINIMOLD (1511) (UNIT: mm) (Top View) (Bottom View) 0.480.05 0.480.05 1.50.1 1.10.1 1.30.05 0.20.1 0.160.05 0.90.1 0.550.03 0.11+0.1 -0.05 Data Sheet PU10627EJ01V0DS 9 PD5713TK RECOMMENDED SOLDERING CONDITIONS This product should be soldered and mounted under the following recommended conditions. methods and conditions other than those recommended below, contact your nearby sales office. Soldering Method Infrared Reflow S o l d e r i n g Con dit io n s Peak temperature (package surface temperature) Time at peak temperature Time at temperature of 220 C or higher Preheating time at 120 to 180 C Maximum number of reflow processes Maximum chlorine content of rosin flux (% mass) Wave Soldering Peak temperature (molten solder temperature) Time at peak temperature Maximum number of flow processes Maximum chlorine content of rosin flux (% mass) Partial Heating Peak temperature (terminal temperature) Soldering time (per side of device) Maximum chlorine content of rosin flux (% mass) : 260 C or below : 10 seconds or less : 60 seconds or less : 120 30 seconds : 3 times : 0.2%(Wt.) or below : 260 C or below : 10 seconds or less : 1 time : 0.2%(Wt.) or below : 350 C or below : 3 seconds or less : 0.2%(Wt.) or below HS350 WS260 Co ndi ti on Sym bo l IR260 For soldering Preheating temperature (package surface temperature) : 120 C or below Caution Do not use different soldering methods together (except for partial heating). 10 Data Sheet PU10627EJ01V0DS 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability. |
Price & Availability of UPD5713TK-E2
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |